Heat pumps for water heating in households

Warm water - Cool cellar - It’s simple! Stainless warm water tank Rotary compressor High coefficient of performance Antilegionella heating program Minimum costs for warm water preparation

Heat pump for sanitary water heating

This heat pump is for indoor installation. The installation room must have at least 15m³ of volume and if possible with one outside window. The selected room for the heat pump will be cooled, energy taken from indoor air will be transformed into heating energy for warm water. Only 3/4 of all needed energy is taken from the electricity network, the rest is free energy from indoor air. The water storage tank in 200 and 300 liter versions have integrated heat exchanger for connection to oil, gas or wood boilers. The material for the water tank and exchanger inside is stainless steel.

Main advantages:

• high quality stainless warm water tank with stainless heat exchanger
• rotary compressor which gives us more than 30% better performance
• operation limit regarding indoor air temperature is 0°C – defrosting system
• possibility of cooling the room where heat pump is standing
• ventilation function in case of sufficient warm water in the tank
• ON/OFF switch
• possibility of air duct connections for making heat pump with directed air flow
• serially integrated electrical heater 1500 W
• antilegionella heating program with possibility of warm water up to 60°C
• always enough warm water regardless of outdoor conditions

• 60 °C
• R410A
• COP 3.2
• Rotary compressor

Different installation examples:

Model	HPDHW	200	300
Heating power	W	2600	2600
Electrical power	W	810	810
Electrical heater power	W	1500	1500
Electric supply	V/Hz	230/50	230/50
Water tank volume	L	200	300
Water heat exchanger surface	m2	1,0	1,5
Air flow	m3/h	450	450
Duct connections diameter	mm	Φ 150	Φ 150
Max. ducts length	m	10	10
Total dimensions	mm	Φ 560 x 1700	Φ 640 x 1750
Water connections diameter	inch	3/4	3/4
Total weight (empty tank)	kg	73	88
Noise level	db	49	49